TÜV Rheinland Validates Performance of Solar Power Panel

“Damage to equipment and modules might also be markedly reduced with our material because this process does not produce acetic acid”

Crystalline silicon PV (photovoltaic) modules made with ENLIGHT™ Polyolefin Encapsulant Films were performance tested by TÜV Rheinland1 in Germany. Following requirements of IEC 61215, the panels were shown to perform well in all test protocols.

“This is another step – an important one – that continues to validate the performance of ENLIGHT™ films for use in crystalline silicon photovoltaic cell technology,” says Mark Hofius, leader of the R&D team. Hofius noted that Dow’s own research shows that using ENLIGHT™ Polyolefin Films to make photovoltaic panels can help extend service life and maintain module reliability. Based on accelerated damp heat test results power loss in panels using more traditional films occur after just 2,000 hours. Modules based on ENLIGHT Polyolefin Film shows no power loss after 10,000 hours.

Using Dow’s polyolefin encapsulant films can also help lower the total system cost of producing the modules. ENLIGHT can allow panel manufacturers to use faster processing speeds (up to 30% faster) because of an extended window for lamination temperatures and the virtual elimination of bubbles, which leads to fewer rejects, according to Hofius. “Damage to equipment and modules might also be markedly reduced with our material because this process does not produce acetic acid,” he says.

Dow began commercial production of these films in Findlay, Ohio, a little more than a year ago. Demand has been so great that the Company is already building two additional manufacturing plants that will come on-stream later in 2012 – one in Map Ta Phut, Thailand, and one in Schkopau, Germany, the heart of Europe’s “solar valley.” When complete, these sites will triple Dow’s current capacity to produce ENLIGHT films.

Dow is dedicated to finding technologies that help harness the power of the sun and bring energy to use in many different ways – through commercial solar farms, through rigid and flexible photovoltaic solar modules, and through innovative new roof shingles for residential homes. Current products include adhesives, heat transfer fluids, coolant and wafer cutting fluids, and metallization, imaging, texturizing and cleaning technologies for solar cells. Dow also is home to POWERHOUSE™ Solar Shingles, which integrates solar technology into residential roofing shingles.

According to the United Nations Environmental Program (UNEP), the global solar energy industry is projected to grow at 25% a year over the next five years, as people continue to embrace solar energy as a good source of electricity and as solar energy costs begin to reach parity with other available energy sources.

TÜV Rheinland tests and certifies systems slated for sale in the European Union, Asian and North American markets to assure that solar thermal, Photovoltaic, Concentrating PV, and concentrated solar power systems comply with electrical, mechanical, and environmental requirements for both product quality and product safety. About 70% of all solar module manufacturers have their products tested by TÜV Rheinland to obtain national and international market licenses.

www.dow.com